Die Cast Machinery LLC Logo World Leader in Used Die Casting Machinery!
 

Used Techmire 8 U.S. Tons Four Slide/Multi-slide Hot Chamber Zinc (Zamak) High Pressure Die Casting Machine


Print PDF!

Status: Available

We offer for sale, subject to prior sale and the terms listed below:

Used Techmire 8 U.S. Tons Four Slide/Multi-slide Hot Chamber Zinc (Zamak) High Pressure Die Casting Machine. Inventory item: DCM-4154.

Manufacturer: Techmire

Model: 22 GZNT (Gas furnace, zinc, NT Design)

Features & Accessories

  • Total Usage: Approximately 3,700 hours and 2,400,000 Total Injection Cycles
  • Currently configured with four (4) Slide Movements
  • Techmire Solid State Programmable Controls
  • Only 3,650 hour of operation from original manufacturer date
  • Dry Cycle Rated at 60 Cycles Per Minute
  • Electric Nozzle Heaters with Natural Gas Fired Furance
  • Includes Taeevo 015 Water Chiller Unit

Item Specifications for DCM-4154

Specifications
Clamping Force:
7.9 tons
Number of Die Motions, Standard/Maximum
4 & 8
Standard Die Size:
2.5 x 2.5 inches
Stroke of each Die Member:
.75 inches
Total Die Opening:
1.5 inches
Ejector Stroke:
1.5 inches
Maximum Hydraulic Line Pressure:
1060 psi
Plunger Diameter/Stroke:
1 & 2.36 inch
Injection Capacity in Zinc:
6.6 oz
Maximum Injection Pressure on Metal:
4000 psi
Furnace Capacity (zinc):
280 pounds
Machine Weight:
3700 pounds

Shipping Terms: Ex-works

Expedited International shipping available to the following Countries: India, Germany, France, Spain, Portugal, Switzerland, Italy, England, Sweden, Netherlands, Poland, Turkey, Ukraine, UK, Great Britain, Russia, Australia, Japan, Korea, Thailand, China, Singapore, Canada, USA, Mexico, Brazil, Argentina, Columbia, Venezuela, Peru, Europe, Asia, North America

Description

Used, Techmire Model 22 GZNT (Gas furnace, zinc, NT Design) 8 U.S. Tons Four Slide/Multi-slide Hot Chamber Zinc (Zamak) High Pressure Die Casting Machine For Sale, Features include: Currently configured with four (4) Slide Movements, Techmire Solid State Programmable Controls, Only 3,650 hour of operation from original manufacturer date, Dry Cycle Rated at 60 Cycles Per Minute, Electric Nozzle Heaters with Natural Gas Fired Furance, Includes Taeevo 015 Water Chiller Unit, Techmire Solid State Programmable Controls Controls, Second Hand, DCM-4154

The following technical terms are to assist you with searches: Used | Second Hand | Techmire |22 GZNT (Gas furnace, zinc, NT Design) | 8 U.S. Tons | Four Slide/Multi-slide Hot Chamber Zinc (Zamak) High Pressure Die Casting Machine | For Sale | Currently configured with four (4) Slide Movements | Techmire Solid State Programmable Controls | Only 3,650 hour of operation from original manufacturer date | Dry Cycle Rated at 60 Cycles Per Minute | Electric Nozzle Heaters with Natural Gas Fired Furance | Includes Taeevo 015 Water Chiller Unit | Techmire Solid State Programmable Controls Controls | DCM-4154


PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.