Used Mokon Model: H44112-00 12 KW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Mokon
Model: H44112-00
Size: 12 KW
Inventory Number: DCM-5606
Used Mokon Model: H44112-00 12 KW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
Features & Accessories:
- Call us on our Hot Oil Temperature Control Unit Hot Line 7:00 AM to 7:00 PM at 1-847-360-9170 Extension 2
- Barber-Colman Series 10 Controller
- HTF 500 Series Mokon Dependability
- Built-in pump pressure relief valve
- Equipped with Water Cooling Circuit
- Unit on casters for easy movement
Item Specifications for DCM-5606
| Specifications | |
|---|---|
| Main Heater Power (Zone #1): |
12 KW
|
| Pump Motor Size (Zone #1): |
1 HP @ 1,145 RPM
|
| Flow Rate (Zone #1): |
10 gallons per minute
|
| Connection size/type (Zone #1): |
3/4 NPT
|
| Maximum Operating Temperature: |
500 degrees F
|
| Overall Size (L x W x H): |
55 x 16 x 48 inches
|
| Full Load Amps @ 460/3/60: |
17.0 amp
|
| Weight: |
460 lbs
|
Document(s) For This Machine
Description
Used, Mokon Model H44112-00 12 KW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Barber-Colman Series 10 Controller, HTF 500 Series Mokon Dependability, Built-in pump pressure relief valve, Equipped with Water Cooling Circuit, Unit on casters for easy movement Barber-Colman Series 10 controls, second Hand, DCM-5606
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
