For Sale: One - Used - Second Hand - Metal Mechanics 50 Ton Four Post Vertical Trim Press
We offer for sale, subject to prior sale and the terms listed below:
For Sale: One - Used - Second Hand - Metal Mechanics 50 Ton Four Post Vertical Trim Press. Inventory item: DCM-2486.
Manufacturer: Metal Mechanics
Serial Number 2074
Features & Accessories
- New in August 2000
- One (1) Core/Punch Circuit
- Allen Bradley SLC Controls
- Trabon Automatic Lubrication System
- Air Safety Ratchet Device
- T-Slotted Platens Top and Bottom
- Top Mounted Hydraulics
Item Specifications for DCM-2486
|Clearance between Tie bars (Left to Right)||
|Clearance between Tie bars (Front to Back)||
|Bed Size (L/R by F/B)||
56 x 49 inches
|Cut-out in Base Platen (L/R by F/B)||
24 x 16 inches
Shipping Terms: Ex-works
One Used (second hand) Metal Mechanics Model DCT-50 Vertical four post Hydraulic die cast Trimming Press, New in 1997, Rated at 50 tons, Serial Number 2074, Equipped with Allen Bradley SLC 5/01 Controls, one (1) side core/punch circuit, Air Safety Ratchet Device, Dual Palm-Button Operation, Mechanical Ejection, Trabon Automatic Lubrication System, T-Slotted Base Platen, T-Slotted Moving Platen, 45.5 inches (1155 mm) left to right by 37.5 inches (952 mm) front to back clearance between tie bars, 56 inches (1422 mm) left to right by 49 inches (1244 mm) front to back bed size, 36 inches (914 mm) of daylight, 20 inches (508 mm) of stroke, 18 inches (457 mm) shut height, 24 inches (609 mm) by 16 inches (406 mm) cut-out in base platen, Cell Number 3, DCM Inventory Number 2486.
The following technical terms are to assist you with searches:
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.