Used Sterlco Model: M2B2713 1.50 kW Single Zone Water Cooling Transfer Temperature Control Unit
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Sterlco
Model: M2B2713
Size: 1.50 kW
Inventory Number: DCM-5379
Used Sterlco Model: M2B2713 1.50 kW Single Zone Water Cooling Transfer Temperature Control Unit.
Features & Accessories:
- Call us on our Hot Oil Temperature Control Unit Hot Line 7:00 AM to 7:00 PM at 1-847-360-9170 Extension 2
- Sterlco Controller
- Alarms for low fluid pressure, pump rotation, over temperature
- Set points for Process, High Alarm, Low Alarm
- Displays for Process Temperature, Return Temperature and Temperature Difference
Item Specifications for DCM-5379
| Specifications | |
|---|---|
| Main Power (Zone #1): |
1.50 KW
|
| Pump Motor Size (Zone #1): |
2 HP
|
| Maximum Operating Temperature: |
131 F
|
| Flow Rate (Zone #1): |
50 gallons per minute
|
| Connection size/type: |
1 inch NPT
|
| Overall Size (L x W x H): |
37 x 18 x 54 inches
|
| Net Weight: |
340 lbs
|
| Full Load Amps @ 460/3/60: |
3.01 amp
|
Description
Used, Sterlco Model M2B2713 1.50 kW Single Zone Water Cooling Transfer Temperature Control Unit For_Sale, Features Include: Sterlco Controller, Alarms for low fluid pressure, pump rotation, over temperature, Set points for Process, High Alarm, Low Alarm, Displays for Process Temperature, Return Temperature and Temperature Difference , controls, second Hand, DCM-5379
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
