Used Regloplas Model: 300LD/20/FM65/1K/RT100 40 kW (20 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Regloplas
Model: 300LD/20/FM65/1K/RT100
Size: 40 kW (20 kw per zone)
Inventory Number: DCM-5428
Used Regloplas Model: 300LD/20/FM65/1K/RT100 40 kW (20 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
Click above for larger image
Features & Accessories:
- 20 KW Per Zone, Dual Zone, Total 40 KW Heating Capacity
- Regloplas FM-65 Magnetic Drive Pumps
- Regloplas
- Separate expansion vessel
- Equipped with R100 Controller
Item Specifications for DCM-5428
Specifications | |
---|---|
Main Heater Power (Zone #1 & 2): |
20 kW
|
Pump Motor Size (Zone #1): |
3.8 HP
|
Flow Rate (Zone #1): |
23 gallons per minute
|
Connection size/type (Zone #1): |
3/4 inch NPT
|
Maximum Operating Temperature: |
572 degrees F
|
Power Requirements at 45.6 Amps: |
480 volt / 3 phase / 60 cycle
|
Overall Size (L x W x H): |
57 x 21 x 53 inches
|
Weight: |
750 Pounds
|
Document(s) For This Machine
Shipping Terms: F.O.B. Warehouse
We offer same day shipping on many of our products with next day delivery available within the United States in many cases. We can supply both domestic and international export packing using ISPM-15 certified materials. We can arrange contractor services for dismantling, rigging, packing and transportation. Within North America we can ship single pieces weighing up to 182,000 pounds/82,727 kg. We have shipped hundreds of die casting machines internationally up to 4,000 tons.
Description
Used, Regloplas Model 300LD/20/FM65/1K/RT100 40 kW (20 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Regloplas FM-65 Magnetic Drive Pumps, Regloplas, Separate expansion vessel, Equipped with R100 Controller, RT100 controls, second Hand, DCM-5428
See jumbo large photos of this Regloplas 300LD/20/FM65/1K/RT100
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.