Die Cast Machinery LLC Logo World Leader in Used Die Casting Machinery!

For Sale: One - Used - Second Hand - Techmire 44 NT High Pressure Hot Chamber Four Slide Zinc Die Casting Machine

Print PDF!

Status: Sold

We offer for sale, subject to prior sale and the terms listed below:

For Sale: One - Used - Second Hand - Techmire 44 NT High Pressure Hot Chamber Four Slide Zinc Die Casting Machine. Inventory item: DCM-2169.

Manufacturer: Techmire

Model: 44 NT

Features & Accessories:

  • Four Slide

Item Specifications for DCM-2169

Standard Die Size
4 x 4 inches
Maximum Ejector Stroke
1.75 inches
Total Die Opening
4 inches
Injection Plunger Diameter
1.625 inches
Injection Cylinder Diameter
3.25 inches
Injection Plunger Stroke
2.38 inches
Dry Shot Speed at 900 psi
55 inches per second
Injection Capacity (maximum theoretical)
17.5 oz
Maximum Shot Weight
9.3 oz
Metal Pressure (maximum theoretical)
3,519 psi
Clamping Force
19.8 tons
Dry Cycle Speed
60 cycles per minute

Shipping Terms: F.O.B. Warehouse


One used (second hand) Techmire 4x4 44NT Hot Chamber Zinc High Pressure Die Casting Machine, Serial Number 98-44ZNT-732, New in 1998 with 101.6 x 101.6 mm (4 x 4 inches) Standard Die Size; 44.4 mm (1.75 inches) Maximum Ejector Stroke; 101.6 mm (4 inches) Total Die Opening; 41.27 mm (1.625 inches) Injection Plunger Diameter; 88/55 mm (3.25 inches) Injection Cylinder Diameter; 60 mm (2.38 inches) Injection Plunger Stroke; 1.43 m/sec (55 ips) Dry Shot Speed at 900 psi; 495 g (17.5 ounces) Injection capacity (maximum theoretical); 265 g (9.3 ounce) Maximum Shot Weight; 243 bars (3.519 psi) Metal Pressure (maximum theoretical); 18 metric tons (19.8 US tons) Clamping Force; and 60 cpm Dry Cycle Speed. DCM Inventory Number 2169

The following technical terms are to assist you with searches:

See jumbo large photos of this Techmire 44NT

PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.