Used Sterlco Model: 18
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Sterlco
Size: 18
Inventory Number: DCM-2698
Used Sterlco Model: 18 .
Click above for larger image
Features & Accessories:
- Heating Capacity Zone #1: 18 KW - Heating Capacity Zone #2: 18 KW - Total Heating Capacity: 36 KW
- Hour Meter for Pump Run Time
- Pressure Switch for Low Pressure Shut Down
Item Specifications for DCM-2698
Specifications | |
---|---|
Full Load Amps @ 460/3/60 |
46
|
Main Heater Power (Zone #1): |
18 KW
|
Main Heater Power (Zone #2): |
18 KW
|
Maximum Operating Temperature: |
550 degrees F
|
Reservoir Capacity: |
17 Gallons
|
Pump Motor Size (Zone #1): |
1 HP
|
Pump Motor Size (Zone #2): |
1 HP
|
Flow Rate (Zone #1): |
18 gallons/minute
|
Flow Rate (Zone #2): |
18 gallons/minute
|
Connection size/type: |
1 inch NPT
|
Overall Size (H x W x D): |
62 x 48 x 34 inches
|
Approximate Shipping Weight: |
1,400 pounds
|
Shipping Terms: F.O.B. Warehouse
We offer same day shipping on many of our products with next day delivery available within the United States in many cases. We can supply both domestic and international export packing using ISPM-15 certified materials. We can arrange contractor services for dismantling, rigging, packing and transportation. Within North America we can ship single pieces weighing up to 182,000 pounds/82,727 kg. We have shipped hundreds of die casting machines internationally up to 4,000 tons.
Description
Used, Sterlco Model 18 For_Sale, Features Include: Hour Meter for Pump Run Time, Pressure Switch for Low Pressure Shut Down , controls, second Hand, DCM-2698
See jumbo large photos of this Model F-6026-DX 36 KW Dual Zone Hot Oil Temperature Control Unit
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.