Used Sterlco Model: M29026-J1 36 KW (18 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Sterlco
Model: M29026-J1
Size: 36 KW (18 kw per zone)
Inventory Number: DCM-4779
Used Sterlco Model: M29026-J1 36 KW (18 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
View Available Hot Oil Units
Features & Accessories:
- Sterlco M2A Microprocessor Control System
- Water Cooling Circuit
- Set points for Process, High Alarm, Low Alarm
- Displays for Process Temperature, Return Temperature and Temperature Difference
- External Expansion Tanks & Alarms for low fluid pressure, pump rotation, over temperature
- Unit on casters for easy movement
Item Specifications for DCM-4779
| Specifications | |
|---|---|
| Main Heater Power (Zone #1): |
18 KW
|
| Pump Motor Size (Zone #1): |
1 HP
|
| Flow Rate (Zone #1): |
24 gallons per minute
|
| Connection size/type (Zone #1): |
1 inch NPT
|
| Maximum Operating Temperature (Zone #1): |
550 degrees F
|
| Main Heater Power (Zone #2): |
18 KW
|
| Pump Motor Size (Zone #2): |
1 HP
|
| Flow Rate (Zone #2): |
24 gallons per minute
|
| Connection size/type (Zone #2): |
1 inch NPT
|
| Maximum Operating Temperature (Zone #2): |
550 degrees F
|
| Overall Size (L x W x H): |
44 x 48 x 89 inches
|
| Full Load Amps @ 460/3/60: |
48 amp
|
Document(s) For This Machine
Shipping Terms: F.O.B. Warehouse
We offer same day shipping on many of our products with next day delivery available within the United States in many cases. We can supply both domestic and international export packing using ISPM-15 certified materials. We can arrange contractor services for dismantling, rigging, packing and transportation. Within North America we can ship single pieces weighing up to 182,000 pounds/82,727 kg. We have shipped hundreds of die casting machines internationally up to 4,000 tons.
Description
Used, Sterlco Model M29026-J1 36 KW (18 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Sterlco M2A Microprocessor Control System, Water Cooling Circuit, Set points for Process, High Alarm, Low Alarm, Displays for Process Temperature, Return Temperature and Temperature Difference, External Expansion Tanks & Alarms for low fluid pressure, pump rotation, over temperature, Unit on casters for easy movement, M2A Temperature Control System controls, second Hand, DCM-4779
See jumbo large photos of this Sterlco M29026-J1
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
