Used Regloplas Hot Water Model: P140XL/20/IMZ-G/SK/RT50 20 kW Single Zone Portable Hot Water Process Heater Temperature control Unit
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Regloplas Hot Water
Model: P140XL/20/IMZ-G/SK/RT50
Size: 20 kW
Inventory Number: DCM-5560
Used Regloplas Hot Water Model: P140XL/20/IMZ-G/SK/RT50 20 kW Single Zone Portable Hot Water Process Heater Temperature control Unit.
Features & Accessories:
- Call us on our Hot Oil Temperature Control Unit Hot Line 7:00 AM to 7:00 PM at 1-847-360-9170 Extension 2
- Leak-free pump with magnetic coupling
- Solid-state relay (SSR)
- High Limit Safety Circuit
- Separate Expansion Tank
- Regloplas RT-50 Digital Temperature Controller
Item Specifications for DCM-5560
| Specifications | |
|---|---|
| Maximum Operating Temperature: |
284 degrees F
|
| Maximum Flow Rate: |
63.4 gallons per minute (GPM)
|
| Maximum Rated System Pressure: |
66.8 Pounds Per Square Inch (PSIG)
|
| Pump Motor Size: |
3.75 Horsepower (HP)
|
| Heating Capacity: |
20 kW
|
| Cooling Capicty: |
110 kw
|
| Tank Capacity/Expansion Capacity: |
9.64 Gallons/1.45 Gallons
|
| Process Connection Size/Type |
1.5 inches NPT (3/4
|
| Control: |
Regloplas RT50
|
| Full Load Amps @ 400 volt: |
35 amp
|
| Overall Size (L x W x H): |
53 x 17 x 53.4 inches
|
| Weight: |
606 lbs
|
Document(s) For This Machine
Description
Used, Regloplas Hot Water Model P140XL/20/IMZ-G/SK/RT50 20 kW Single Zone Portable Hot Water Process Heater Temperature control Unit For_Sale, Features Include: Leak-free pump with magnetic coupling, Solid-state relay (SSR), High Limit Safety Circuit, Separate Expansion Tank, Regloplas RT-50 Digital Temperature Controller RT50 controls, second Hand, DCM-5560
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
