Used HEAT Heat Exchange And Transfer Model: WM450-36WC-483 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: HEAT Heat Exchange And Transfer
Model: WM450-36WC-483
Size: 36 kW
Inventory Number: DCM-5570
Used HEAT Heat Exchange And Transfer Model: WM450-36WC-483 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
View Available Hot Oil Units
Features & Accessories:
- Call us on our Hot Oil Temperature Control Unit Hot Line 7:00 AM to 7:00 PM at 1-847-360-9170 Extension 2
- Displays for Process Temperature
- Alarms for low fluid pressure, pump rotation, over temperature
- Eurotherm 3216 Controller
- Manual function for heating and cooling
- Unit on casters for easy movement
Item Specifications for DCM-5570
| Specifications | |
|---|---|
| Main Heater Power (Zone #1): |
36 KW
|
| Pump Motor Size (Zone #1): |
2 HP
|
| Maximum Operating Temperature: |
450 degrees F
|
| Flow Rate (Zone #1): |
40 gallons per minute
|
| Connection size/type: |
1.5 inch NPT Flange
|
| Power Requirement: |
480 Volt / 3 phase / 60 cycle
|
| Full Load Amps: |
48 Amps
|
| Overall Size (L x W x H): |
42 x 24 x 50 inches
|
| Weight |
800 lbs
|
Document(s) For This Machine
Description
Used, HEAT Heat Exchange And Transfer Model WM450-36WC-483 36 kW Single Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Displays for Process Temperature, Alarms for low fluid pressure, pump rotation, over temperature, Eurotherm 3216 Controller, Manual function for heating and cooling, Unit on casters for easy movement Eurotherm 3216 controls, second Hand, DCM-5570
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
