Used Sterlco Model: F6026-D-X 24 kw (12 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Sterlco
Model: F6026-D-X
Size: 24 kw (12 kw per zone)
Inventory Number: DCM-5584
Used Sterlco Model: F6026-D-X 24 kw (12 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
View Available Hot Oil Units
Features & Accessories:
- Alarms for low fluid pressure, pump rotation, over temperature
- Set points for Process, High Alarm, Low Alarm
- Displays for Process Temperature
- Unit on casters for easy movement
- Sterlco Series 400 Analog Controllers
- Water Cooling Circuit
Item Specifications for DCM-5584
| Specifications | |
|---|---|
| Main Heater Power (Zone 1 & 2): |
12 kw
|
| Pump Motor Size (Zone 1 & 2): |
.75 HP
|
| Flow Rate (Zone 1 & 2): |
24 gallons per minute
|
| Connection size/type (Zone 1 & 2): |
1 inch
|
| Maximum Operating Temperature: |
550 F
|
| Motor: |
1725 RPM
|
| Overall Size (L x W x H): |
40 x 42 x 56 inches
|
| Full Load Amps @ 460/3/60: |
32 amp
|
Document(s) For This Machine
Description
Used, Sterlco Model F6026-D-X 24 kw (12 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Alarms for low fluid pressure, pump rotation, over temperature, Set points for Process, High Alarm, Low Alarm, Displays for Process Temperature, Unit on casters for easy movement, Sterlco Series 400 Analog Controllers, Water Cooling Circuit, Sterlco Series 400 Analog controls, second Hand, DCM-5584
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
