Used Mokon Model: 320121 30 kW (18 kW zone 1 12 kw zone 2) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: Mokon
Model: 320121
Size: 30 kW (18 kW zone 1 12 kw zone 2)
Inventory Number: DCM-5664
Used Mokon Model: 320121 30 kW (18 kW zone 1 12 kw zone 2) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
View Available Hot Oil Units
Features & Accessories:
- Call us on our Hot Oil Temperature Control Unit Hot Line 7:00 AM to 7:00 PM at 1-847-360-9170 Extension 2
- Mokon Series Dependability
- Eurotherm 3216 Microprocessor Controller
- Built-in pump pressure relief valve
- Equipped with Water Cooling Circuit
- Unit on casters for easy movement
Item Specifications for DCM-5664
| Specifications | |
|---|---|
| TOTAL KW: |
30 KW
|
| Main Heater Power Zone 1: |
12 kW
|
| Main Heater Power Zone 2: |
18 KW
|
| Pump Motor Size Zone 1: |
1 HP @1,160 RPM
|
| Pump Motor Size Zone 2: |
2 HP @1,175 RPM
|
| Flow Rate Zone 1: |
10 gallons per minute
|
| Flow Rate Zone 2: |
20 gallons per minute
|
| Connection size/type Zone 1 & 2: |
3/4 & 1 inch NPT
|
| Maximum Operating Temperature: |
500 degrees F
|
| Full Load Amps @ 460/3/60: |
42.8 amp
|
| Overall Size (L x W x H): |
41 x 30 x 62 inches
|
| Shipping Weight: |
1200 pounds
|
Document(s) For This Machine
Description
Used, Mokon Model 320121 30 kW (18 kW zone 1 12 kw zone 2) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Mokon Series Dependability, Eurotherm 3216 Microprocessor Controller, Built-in pump pressure relief valve, Equipped with Water Cooling Circuit, Unit on casters for easy movement Eurotherm 3216 controls, second Hand, DCM-5664
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
