Used AEC Model: 2TCOU-2 96 kw (48 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit
Status: Sold - View Available
We offer for sale, subject to availability, prior sale and the terms listed below:
Manufacturer: AEC
Model: 2TCOU-2
Size: 96 kw (48 kw per zone)
Inventory Number: DCM-5372
Used AEC Model: 2TCOU-2 96 kw (48 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit.
Please contact our offices for pictures
Features & Accessories:
- Alarms for low fluid pressure, pump rotation, over temperature
- Set points for Process, High Alarm, Low Alarm
- Displays for Process Temperature, Return Temperature and Temperature Difference
Item Specifications for DCM-5372
| Specifications | |
|---|---|
| Main Heater Power (Zone #1 & 2): |
48 kW
|
| Pump Motor Size (Zone #1 & 2): |
2 HP
|
| Flow Rate (Zone #1 & 2): |
24 gallons per minute
|
| Connection size/type: |
2 inch NPT
|
| Maximum Operating Temperature: |
550 degrees F
|
| Overall Size (L x W x H): |
48 x 44 x 62 inches
|
| Full Load Amps @ 468/3/60: |
120 AMPS
|
| Approximate Shipping Weight: |
2,000 lbs
|
Document(s) For This Machine
Description
Used, AEC Model 2TCOU-2 96 kw (48 kw per zone) Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit For_Sale, Features Include: Alarms for low fluid pressure, pump rotation, over temperature, Set points for Process, High Alarm, Low Alarm, Displays for Process Temperature, Return Temperature and Temperature Difference Microprocessor controls, second Hand, DCM-5372
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.
